"Reducing the SyBr Green consumption by 40% means considerable cost savings to us."

Dr Carolin Deiner, Institut für Veterinär-Physiologie, Berlin, Germany

Product Info

Product Information

#

Universal fit to low profile 96-well blocks; with low profile 0.15 ml polypropylene wells, a rigid non-skirted polycarbonate frame, and a cut corner at H1


The low profile wells of this plate are shorter than "standard" profile wells, which decrease the "dead space" between the heated lid of the thermal cycler and the sample in the well. This eliminates condensation forming on the side wall of the tubes, preventing reduction in PCR volume and increasing the efficiency of the reaction. This is especially recommended for reaction volumes below 20 µl.

The rigid polycarbonate skirt of this design eliminates warping and distortion during PCR, meaning seal integrity is not compromised and less of your sample is lost through evaporation.

For more information on the features and benefits of the FrameStar® range of 2-component PCR plates, please click here »

Technical Specifications

Plate Width120.00 ± 0.25 mm
Plate Depth80.00 ± 0.25 mm
Plate Height15.60 ± 0.25 mm
Well Depth15.10 ± 0.25 mm
Well Diameter5.50 ± 0.10 mm
Distance to centre of A1 from top edge8.50 ± 0.25 mm
Distance to centre of A1 from left edge10.50 ± 0.25 mm
Pitch (distance between A1 and A2)9.00 mm

Features

Plate Features

  • Recommended for low volume PCR
  • Rigid polycarbonate frame adds to the mechanical stability of the plate - as a result thermal expansion and sample evaporation is reduced significantly, leading to an improved consistency in PCR results
  • Ultra-smooth, uniform, thin-walled polypropylene tubes for optimum PCR and real-time (RT, qPCR) results
  • Improved seal integrity due to thermal stability of frame
  • Compatible with standard multichannel pipettes
  • 0.15 ml (150 µl) working volume, 0.2 ml (200 µl) max volume
  • 6 frame colour options for the clear well variety - purple, blue, clear, green, red, and black
  • Also available as a black frame with white wells for optimum signal-to-noise ratio when using fluorescent based assays
  • Raised and colour differentiated grid reference to aid well and sample identification

Compatibility

Compatibility

STANDARD THERMAL CYCLERS

BIOMETRA

  • T1 Thermocycler
  • TGradient
  • TRobot, Uno
  • Uno II

BIO-RAD

  • C1000
  • S1000
  • T100

BIO-RAD MJ RESEARCH

  • Mini Gradient
  • PTC100™ (96 well block only)
  • DNA Engine™, DNA Dyad™, DNA Tetrad™

CORBETT RESEARCH

  • (Qiagen) Palm Cycler

EPPENDORF

  • MasterCycler®
  • MasterCycler® EP Gradient
  • MasterCycler® Gradient

MWG

  • Primus 96
  • The Q Lifecycler

PEQLAB

  • peqSTAR 96

SENSOQUEST

  • labcycler

TAKARA

  • TP3000

TECHNE

  • Cyclogene
  • Flexigene
  • Genius, Genius Quad
  • TC412/512
  • Touchgene
  • Touchgene Gradient

THERMO FISHER SCIENTIFIC

  • MultiBlock System, MBS
  • PCR Sprint


QPCR CYCLERS

BIO-RAD

  • CFX96

BIO-RAD MJ RESEARCH

  • Chromo4™
  • Opticon™, Opticon2™

EPPENDORF

  • Mastercycler™ ep realplex

TECHNE

  • Quantica

Ordering

Ordering

4ti-0720 FrameStar® 96 Well Non-Skirted Low Profile PCR Plate, clear wells, purple frame
50 plates
4ti-0720/B FrameStar® 96 Well Non-Skirted Low Profile PCR Plate, clear wells, blue frame50 plates
4ti-0720/C FrameStar® 96 Well Non-Skirted Low Profile PCR Plate, clear wells, clear frame50 plates
4ti-0720/G FrameStar® 96 Well Non-Skirted Low Profile PCR Plate, clear wells, green frame50 plates
4ti-0720/R
FrameStar® 96 Well Non-Skirted Low Profile PCR Plate, clear wells, red frame 50 plates
4ti-0720/X FrameStar® 96 Well Non-Skirted Low Profile PCR Plate, clear wells, black frame 50 plates
4ti-0721 FrameStar® 96 Well Non-Skirted Low Profile qPCR Plate, white wells, black frame 50 plates

Sealing Options

Sealing Options

There are a number of sealing options available to this plate, depending on the application and desired outcome.
    See below for a selection:


    Related Products